Displayport KVM to Fiber Converter also named as Displayport KVM fiber extenders,which consist of a displayport transmitter and a receiver. It uses 11G high-speed photoelectric conversion transmission rate to convert ultra 2K/4K resolution Displayport and USB mouse and keyboard signals into optical signals over fiber cable while maintaining flawless image quality. This product is suitable for various requirements of ultra-high-definition Displayport+USB keyboard and mouse long-distance optical fiber transmission.
For example,an Displayport signal and USB signals comes from a source device such as a set-top box or Blue-Ray player, converted into light pulses by the transmitter module,after 10KM transmission over a single mode fiber then output at the receiver side via a display.
In fact,the Displayport Fiber Optic Extender supports either multi-mode or single-mode fiber transmission. which makes the equipment a powerful solution for digital display applications that require flawless signal quality over extremely long cable runs.
Product feature:
1, 11G fiber transmission rate, truly uncompressed and no delay transparent transmission.
2, support Displayport V1.1 standard, resolution can reach 720p/60Hz, 1080i/60Hz, 1080p/30Hz, 1080p/60Hz, 1080p/120Hz, 1920x1200, 2560x1440, etc., the highest resolution: Ultra-HD 4K (3840x2160@ 30Hz)
3, support HDCP, DPCD, DDC2B
4, multi-mode fiber 300 ~ 500 meters, single-mode fiber 10KM long-distance transmission.
5, support USB mouse and keyboard
Product specification:
| Performance: |
| Compliance | Displayport V1.1 |
| Maximum Video Bandwidth | 10.8Gbps |
| Digital Audio Support | Dolby Digital, Dolby Digital Plus, Dolby True HD and DTS-HD Master Audio |
| Supported HDTV Formats | Supports all HDTV resolutions including 1080p, 2K and 4K (UHD) formats |
| Supported PC Resolutions | 720p/60Hz, 1080i/60Hz, 1080p/30Hz,1080p/60Hz, 1080p/120Hz,1920x1200,2560x1440,Ultra-HD 4K (3840x2160@30Hz) |
| Optical: |
| Optical Transmitter | Laser Source: 1310nm / 1550nm |
| Optical Receiver | PIN Photo Diode O/E Converter |
| Fiber Cable Type / Max. Length | 62.5/125um MMF 300 meters ,50/125um MMF 500 meters
9/125μ single-mode optical fiber 10KM |
| Connections: |
| Displayport | 20-pin DisplayPort female connectors |
| Optical Input / Output | female LC optical connectors |
| Mechanical: |
| Construction | Extruded Aluminum enclosure with black anodized finish |
| Dimensions | 104 mm x 104 mm x 28 mm |
| Weight | 700g per pair |
| Environmental: |
| Operating Temperature | 0° to +50° C |
| Storage Temperature | -20° to +70° C |
| Humidity (storage / operating) | 10% to 90% (non-condensing) |
| Power Requirements: |
| Power Source | Both Tx and Rx units must be powered using the supplied external AC power adapters |
| External AC Power Adapter | Input: 100~240VAC / 50-60Hz, 0.5A Output: 5VDC, 2.0A |
| Maximum Power Consumption | TX Unit: 3.5 watts RX Unit: 3.5 watts |
USB interface:
| TX | 1,connect to PC/ HDMI source |
| RX | 2, connect to Cable keyboard or mouse |
Connection Diagram
|
|
OEM Displayport KVM fiber extenders for 2K/4K Displayport V 1.1 and USB1.0 signals over single mode fiber to 10KM Images
|
